无花果的研究与产业化发展对策

简述了无花果的化学成分、药用保健价值、临床应用及其在医药和食品工业中的深加工利用等。无花果含有丰富的糖类、有机酸、脂类、维生素、活性生化物质、矿物质等成分，具有调节免疫、防癌抗癌、护肝、降血糖和血脂等药用保健价值，在医药和食品工业中有广泛的应用，并提出了加入WTO后我国无花果产业化发展的对策。     

电子元器件表面化学防护效果的测定研究

目的研究电子元器件表面化学防护的方法。方法应用选择性涂覆设备进行研究并优化工艺条件,选择丙烯酸清漆和稀释剂的体积混合比例从1∶0.2到1∶1进行实验,在100 mm/s的喷涂速度下,喷涂印制板的过程在0.5 min内完成,喷涂的相对标准偏差不超过±0.005 mm。结果涂层厚度可控制在25~75μm的范围内,符合国际标准ICP-CC-830的要求,涂层具有较好的流平性,无气泡、针孔和絮状物,无雾化等。结论这种方法可以成功地应用于印制板上电子元器件表面的化学防护。该方法具有涂覆准确性高,有毒稀释剂消耗量低,涂覆效果好,经济环保等的特点。     

石油安全指标体系与综合评价

为科学评价我国石油安全的程度,从国内资源禀赋、国内生产能力、国际市场可得性和国家应急保障能力等4个方面,设计了石油安全评价指标体系。采用德尔菲法、主成分分析法,选取储采比、储量替代率、石油消费对外依存度、石油进口集中度、国际原油价格和国内石油储备水平等6个个指标,构成一个新的综合指标:石油安全度,用其对我国石油安全形势进行定量评价。将石油安全度的安全警戒划分为五级:I级1～0.8,基本安全;II级0.8～0.6,弱安全;III级0.6～0.4,不安全;Ⅳ级0.4～0.2,很不安全;V级0.2以下,严重不安全。1993-2004年,我国石油安全度为0.54～0.75,处于弱安全到不安全之间。     

连接管件的先进塑性成形技术试验研究

介绍了 3种先进的连接管件成形技术 ,即小弯曲半径管内压推弯成形技术、球形管接头的胀形成形技术和管件的内径滚压成形技术 ,对其基本成形过程进行了描述 ,并通过铝合金、不锈钢和钛合金管件的成形试验获得了主要工艺参数对成形的影响规律 ,结果表明采用这些方法成形所需的连接管件是非常有效的     

Identifying sources of soil inorganic pollutants on a regional scale using a multivariate statistical approach: role of pollutant migration and soil physicochemical properties

Principal components analysis (PCA) and correlation analysis were used to estimate the contribution of four components related to pollutant sources on the total variation in concentrations of Cu, Zn, Pb, Cd, As, Se, Hg, Fe and Mn in surface soil samples from a valley in east China with numerous copper and zinc smelters. Results indicate that when carrying out source identification of inorganic pollutants their tendency to migrate in soils may result in differences between the pollutant composition of the source and the receptor soil, potentially leading to errors in the characterization of pollutants using multivariate statistics. The stability and potential migration or movement of pollutants in soils must therefore be taken into account. Soil physicochemical properties may offer additional useful information. Two different mechanisms have been hypothesized for correlations between soil heavy metal concentrations and soil organic matter content and these may be helpful in interpreting the statistical analysis.     

Seasonal Variation of Chemical Composition in Fine Particles at Gosan, Korea

PM_2.5 aerosol samples were collected at Gosan in Jeju Island during six intensive measurement periods between November 2001 and August 2003. In order to investigate the chemical composition of fine particles, major ion components, trace elements, and elemental and organic carbon were analyzed. Quite different seasonal characteristic in the chemical composition of fine particles was observed. The concentration of most secondary aerosol components showed a summer minimum and a winter maximum with higher correlation between them at Gosan. This fact clearly reveals the possibility of long-range transport of such pollutants in winter. On the other hand, OC and EC had the highest concentration and good correlation with ion components, such as K⁺, Ca²⁺ in fall. It means that biomass burning could significantly influence the ambient fine carbonaceous particulate in fall, which was primarily long-range transported.     

Molecular characterization of root exudates using Fourier transform ion cyclotron resonance mass spectrometry

The release of root exudates (REs) provides an important source of soil organic carbon. This work revealed the molecular composition of REs of different plant species including alfalfa (Medicago sativa L.), bean (Phaseolus vulgaris L.), barley (Hordeum vulgare L.), maize (Zea mays), wheat (Triticum aestivum L.), ryegrass (Lolium perenne L.) and pumpkin (Cucurbita maxima) using electrospray ionization coupled with Fourier transform ion cyclotron resonance mass spectrometry (ESI FT-ICR MS). The combination of positive ion mode (+ESI) and negative ion mode (-ESI) increased the number of the molecules detected by ESI FT-ICR MS, and a total of 8758 molecules were identified across all the samples. In detail, lipids and proteins and unsaturated hydrocarbons were more easily detected in +ESI mode, while aromatic compounds with high O/C were readily ionized in -ESI mode, and only 38% of the total assigned formulas were shared by -ESI and +ESI modes. Multivariate statistical analysis of the formulas indicated that the close related plants species secreted REs with similar molecular components. Moreover, the unsaturation degree and nitrogen content were the two key parameters able to distinguish the similarities and differences of molecular components of REs between plant species. The results provided a feasible analysis method for characterization of the molecular components of REs and for the first time characterized the molecular components of REs of a variety of plant species using ESI FT-ICR MS.     

京津冀典型城市一次重污染过程特征及边界层结构变化对其影响

为探究典型重污染过程的污染特征与大气边界层结构演变规律,基于PM_2.5采样数据、气象观测数据及WRF-Chem模式,以北京市和石家庄市2016年12月27日—2017年1月10日一次重污染过程为研究对象,对气象要素、PM_2.5化学组分、天气背景场、边界层结构演变特征,以及大气边界层结构变化对ρ(PM_2.5)及其主要化学组分的影响进行分析.结果表明:①研究期间,北京市和石家庄市ρ(PM_2.5)分别为(165.63±110.89)(247.67±95.22)μg/m3,石家庄市污染程度高于北京市;高空纬向环流和地面弱高压控制的天气背景场,低于1.75 m/s的风速以及超过75%的相对湿度是造成北京市与石家庄市重污染的不利气象条件.②重污染时段北京市与石家庄市SNA(SO₄2-、NO₃-、NH₄+三者的统称)与碳质组分(OC、EC)占比之和超过76%,是PM_2.5中的两大主要组分;重污染时段ρ(SNA)占比明显上升,北京市与石家庄市ρ(SNA)占比由非重污染时段的42.23%、45.93%分别升至重污染时段的58.87%、59.62%;北京市与石家庄市ρ(OC)/ρ(EC)分别为5.13、3.51,表明在重污染时段两城市存在明显的二次有机气溶胶污染.③WRF-Chem模式模拟结果表明,PM_2.5污染严重时北京市与石家庄市在300~500 m处均出现明显的逆温,垂直风场主要表现为低层偏南风顺时针向上切变为偏西风,切变高度在400~1 000 m,逆温层结与明显垂直风切变的边界层特征共同抑制了污染物的湍流与扩散.④北京市与石家庄市重污染时段的PBLH(Planetary Boundary Layer Height,大气边界层高度)日均值与非重污染时段相比分别下降了202、128 m,PBLH每下降100 m,北京市与石家庄市ρ(PM_2.5)分别上升18.81、29.85 μg/m3,PBLH下降是导致两城市ρ(PM_2.5)快速上升的重要因素.北京市与石家庄市的PBLH与PM_2.5组分质量浓度之间的相关性不同,北京市PBLH与ρ(SNA)的相关性高于与碳质组分质量浓度的相关性,石家庄市PBLH与ρ(EC)相关性最高,表明此次重污染过程中北京市PM_2.5污染特征以二次形成为主,而石家庄市以一次排放为主.研究显示,北京市与石家庄市此次重污染过程与大气边界层结构变化密切相关.      

石家庄市冬季一次重污染过程分析与反馈效应研究

为深入探究高ρ（PM_2.5）地区重污染过程的发展变化规律,以石家庄市一次重污染过程（2017年1月13-20日）为例,结合空气质量监测数据、PM_2.5组分测试数据、气象观测资料,从重污染发展阶段（简称"P1阶段"）、维持阶段（简称"P2阶段"）和清除阶段（简称"P3阶段"）分析PM_2.5及其化学组分的变化特征、气象条件和高低空天气形势演变特征,并利用WRF-Chem模型定量研究重污染过程气溶胶反馈效应对典型气象要素的影响.结果表明:①此次重污染过程属于逐步累积增长、快速清除型,在P2阶段ρ（PM_2.5）平均值为241.0 μg/m3,最大值为367.5 μg/m3.②P1和P2阶段高低空大气环流配置稳定,大气边界层高度范围为620.6~712.2 m,风速范围为1.3~2.5 m/s,相对湿度范围为60%~80%.③P2阶段SOR（硫氧化率）和NOR（氮氧化率）均为0.3,ρ（SNA）（SNA为SO₄2-、NO₃-和NH₄+的统称）为128.8 μg/m3,占ρ（PM_2.5）的56.2%;OM[有机质,ρ（OM）=ρ（POA）+ρ（SOA）,其中,POA为一次有机气溶胶,SOA为二次有机气溶胶]是除SNA以外的第二大组分,在P1和P3阶段ρ（POA）大于ρ（SOA）,而在P2阶段ρ（SOA）与ρ（POA）相等,均为28.0 μg/m3,表明在重污染过程中二次污染严重;整个污染过程ρ（NO₃-）/ρ（SO₄2-）为1.0,表明石家庄市移动源和固定源对ρ（PM_2.5）贡献相当.④WRF-Chem模型模拟结果表明,太阳辐射量、温度和大气边界层高度受气溶胶反馈效应的影响在P2阶段的下降量分别为75.1 W/m2、2.7℃和109.9 m,比P1阶段分别高33.6%、91.4%和18.6%,比P3阶段分别高147.0%、305.3%和24.1%.研究显示,此次静稳天气下的重污染过程二次污染严重,气溶胶反馈效应整体使得太阳辐射量、温度和大气边界层高度均向不利于污染扩散的趋势发展,造成石家庄市的ρ（PM_2.5）进一步增加.      

空空导弹新研元器件振动试验条件探讨

空空导弹新研元器件是空空导弹重要组成部分,振动试验是考核新研元器环境适应性的一项重要环境试验,目前的问题是如何制定合理可行的新研元器件的振动试验条件。为了研究空空导弹新研元器件开展多个振动试验时是否存在过试验考核或者重复试验考核问题,对空空导弹新研元器件相关标准、规范及空空导弹要求的振动试验条件进行整理、归纳,对比分析了振动量级、振动时间,得出空空导弹新研元器件可以只按照有关标准、规范规定的振动试验条件考核其振动特性即可,可以不开展空空导弹要求的振动试验。